Initial commit

Initial commit.

bootloader/mcuboot/boot/zephyr/boards/thingy91x_nrf5340_cpuapp.conf

@@ -0,0 +1,63 @@
+# MCUBoot settings
+CONFIG_BOOT_MAX_IMG_SECTORS=110
+
+# MCUboot serial recovery
+CONFIG_MCUBOOT_SERIAL=y
+
+# Disable Zephyr console
+CONFIG_LOG=n
+CONFIG_CONSOLE=n
+CONFIG_CONSOLE_HANDLER=n
+CONFIG_UART_CONSOLE=n
+
+# Serial
+CONFIG_SERIAL=y
+CONFIG_UART_NRFX=y
+CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_UART_LINE_CTRL=y
+
+# MCUboot serial recovery
+CONFIG_GPIO=y
+CONFIG_MCUBOOT_SERIAL=y
+CONFIG_BOOT_SERIAL_CDC_ACM=y
+
+# Required by USB
+CONFIG_MULTITHREADING=y
+
+# USB
+CONFIG_USB_DEVICE_STACK=y
+CONFIG_USB_DEVICE_PRODUCT="MCUBOOT"
+CONFIG_USB_CDC_ACM=y
+CONFIG_USB_COMPOSITE_DEVICE=y
+CONFIG_USB_MASS_STORAGE=n
+CONFIG_USB_DEVICE_MANUFACTURER="Nordic Semiconductor"
+CONFIG_USB_DEVICE_VID=0x1915
+CONFIG_USB_DEVICE_PID=0x910A
+
+CONFIG_BOOT_SERIAL_BOOT_MODE=y
+
+CONFIG_PM_PARTITION_SIZE_MCUBOOT=0x13E00
+
+# The following configurations are required to support simultaneous multi image update
+CONFIG_PCD_APP=y
+CONFIG_UPDATEABLE_IMAGE_NUMBER=2
+CONFIG_BOOT_UPGRADE_ONLY=y
+# The network core cannot access external flash directly. The flash simulator must be used to
+# provide a memory region that is used to forward the new firmware to the network core.
+CONFIG_FLASH_SIMULATOR=y
+CONFIG_FLASH_SIMULATOR_DOUBLE_WRITES=y
+CONFIG_FLASH_SIMULATOR_STATS=n
+
+CONFIG_BOOT_IMAGE_ACCESS_HOOKS=y
+
+# Makes it possible to update the network core using the flash simulator
+CONFIG_NRF53_RECOVERY_NETWORK_CORE=y
+
+CONFIG_MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD=y
+CONFIG_BOOT_SERIAL_IMG_GRP_IMAGE_STATE=y
+
+# Skip checks on the secondary image to make it possible to update MCUBoot on S1/S0
+CONFIG_MCUBOOT_VERIFY_IMG_ADDRESS=n
+
+CONFIG_BOOT_SERIAL_NO_APPLICATION=y
+CONFIG_FW_INFO_FIRMWARE_VERSION=2